Nominal Input Voltage: |
220 – 240 VAC |
Line Current, nominal: |
0.1A MAX. |
Mains Frequency: |
50/60 Hz |
Rated Power factor: |
> 0.9 (full load) @ 230V |
Power Loss in no load condition |
<0.3W |
Protection Class: |
II |
Output Current: |
180-500 mADC |
(Remark) |
@CV30–40VDC 180-500mA |
Output voltage: |
30VDC –40VDC |
(Remark) |
Maximum < 50 VDC |
Output Power: |
Maximum 20W |
No-load proof: |
Yes |
Short circuit protection: |
Automatic, reversible |
Overload protection: |
Automatic, reversible |
Over temperature protection: |
Automatic, reversible |
Ambient temperature range, ta: |
-20 °C to +45 °C |
Max. case temperature at tc point: |
75 °C |
Dimming: |
Suitable for trailing edge dimmer & leading edge dimmer |
ECG Lifetime: |
30,000h or 3 years Fail rate <10% |
(Remark) |
at use of Under normal conditions |
Cable cross section input side & output side |
0.5-2.5mm |
Wire preparation length Input side & output side |
7-8 mm |
Geometry (l x b x h): |
127x 49x 15mm |
Weight: |
78 g |
Safety Standard: |
IEC 61347-1, IEC 61347-2-13, IEC 62384 |
Radio interference: |
CISPR 15 |
Harmonic content: |
IEC 61000-3-2 |
Immunity: |
IEC 61000-3-3,IEC 61547 |
Surge capability: |
L-N: 500V |
Galvanic isolation |
3,75 kVrms |
primary/secondary : |
SELV-equivalent |